If you want to add an aesthetic look and privacy to your home or space, hanging curtains is a great way to start. 

However, hanging a curtain rod can sometimes be challenging, especially if you’re not an expert.

Fortunately, hanging a curtain rod on drywall is an easy process that anyone can do with the right tools and techniques.

Here are the steps to hang a curtain rod on drywall. 

Firstly, you’ll need a drill, screws, anchors, a tape measure, and a level. Then, start by measuring and marking where you want the brackets to go. Insert the anchors and brackets using the drill and screws. Next, once the brackets are secure, slide the curtain rod onto the brackets and hang your curtains. Finally, use a level to make sure everything is straight.

In this article, we’ll take you through a step-by-step process of hanging a curtain rod on drywall and other crucial processes for hanging your curtains.

Ready for a Drywall Quiz?

How Do I Mount Curtain Rods on Drywall (Step by Step)?

How To Hang Curtain Rod on Drywall

Mounting curtain rods on drywall is a relatively easy task that anyone can achieve in a few easy steps. 

Here are the steps to take to mount a curtain row on drywall:

Step 1: Gather the Necessary Tools and Materials

Before hanging a curtain rod, you must gather the necessary tools and materials.

To mount a curtain rod, you’ll need the following;

Step 2: Determine the Placement of the Brackets

When you’ve finally gathered the necessary tools for mounting the curtains, the next thing to do is to use a measuring tape to determine the placement of the brackets on the wall. 

Typically, the curtain brackets should be about 4-6 inches above the window frame, but you can adjust this according to your preference. 

To your preference, you can use a level to ensure the brackets are straight and even.

Step 3: Mark the Placement of the Brackets

The next step is to determine the markings and placement of the brackets. You can use a pencil to mark the placement on the wall. Always ensure the marks are level and evenly spaced.

Step 4: Install the Drywall Anchors

To install the drywall anchors, use a drill to create pilot holes where you previously marked the bracket’s placement.

Then, insert the drywall anchors into the holes. By doing this, the anchors provide a secure foundation for the screws for insertion into the drywall.  

Step 5: Install the Brackets

After inserting the screws into the drywall, the next step is to install the brackets. 

To do so, follow the following points:

  1. Place the brackets on the wall and align them with the anchor holes. 
  2. Then, insert the screws through the bracket and into the anchors using a drill. 
  3. Ensure to tighten the screws securely so the brackets do not lose.

Step 6: Attach the Curtain Rod

Once you’ve successfully installed the screws securely on the drywall, attach the curtain rod to the brackets. 

It is crucial to note that some curtain rods rest on the brackets, while others may require screws to attach the rod to the brackets.

Step 7: Hang the Curtains

Finally, adjust your curtains on the rod to your preferred position and height. 

How easy is this? Mounting curtain rods may seem a daunting task, but it isn’t. 

With these few tools and steps, you’re on your way to having a perfectly hung curtain and a beautiful-looking space. 

Can I Hang Curtain rods on drywall without anchors?

Yes! You can hang curtain rods on drywall without anchors. However, hanging curtain rods on drywall without anchors is not advisable.

It isn’t advisable because drywall is not strong enough to support the weight of the curtains and the rod without extra support. 

Without anchors, the screws will not hold securely in the drywall. 

The unstable weight could damage the wall or, even worse, cause unforeseen injuries to someone if the curtain rod falls.

However, if you still prefer to hang curtain rods on drywall without anchors, here are the steps to make the installation more secure.

Step 1: Choose a Lightweight Curtain Rod

Choose a lightweight curtain and curtain rod to prevent the curtain from falling.

Also, it is crucial to avoid heavy metal rods or thick wooden rods that could cause damage to the drywall.

Step 2: Use Longer Screws

Always use longer screws to handle the curtain rod when hanging the brackets. Sometimes, you decide to use the screws with the curtains, but it’s best not to. 

The longer screws are better because they penetrate further into the drywall, providing additional support for the brackets and the curtains. 

Step 3: Screw Into a Stud

If possible, it is crucial to try to screw the brackets into a wall stud and not directly into the drywall.  

You may wonder, what exactly is a stud? A stud is a vertical beam in the wall made of either wood or metal, more substantial than drywall. 

You can use a stud finder to locate the studs behind the drywall.

Step 4: Install Toggle Bolts

Using toggle bolts is another option for hanging curtain rods without anchors. 

Due to the design, they evenly distribute the weight of the curtains over a larger area, reducing the risk of damage to the drywall. 

To install toggle bolts, firmly drill a hole into the drywall and insert the bolt. Then, tighten the bolt until it is securely in place.

Step 5: Test the Installation

Before hanging your curtains, giving the curtain rod a gentle tug is crucial to ensure it is securely in place and firmly attached to the drywall. 

If the brackets feel loose or wobbly, tighten the screws or toggle bolts until tight and firm. 

While it is not advisable to hang curtain rods on drywall without anchors, you can take steps to make the installation secure for hanging. 

However, you can only recommend specific rods when installing the curtains on drywall for the best results and to prevent any damage to your walls.

Can I Hang a Curtain Rod on a Window Covered with Drywall?

Installing a curtain rod on a window covered with drywall is feasible. However, it requires proper techniques outlined in a window drywall installation guide. Following the guide’s instructions, you can safely mount the curtain rod onto the drywall, enhancing your window’s functionality and adding a touch of elegance to your space.

Can the Same Technique for Filling Large Gaps in Drywall be Used to Hang a Curtain Rod on Drywall?

When it comes to hanging a curtain rod on drywall, the technique used for filling large gaps in drywall step-by-step may not necessarily apply. While filling large gaps requires a different set of procedures, mounting a curtain rod involves wall anchors or brackets specifically designed for this purpose. Understanding the appropriate technique for each task is crucial to ensure a secure and sturdy installation.

How to Hang Curtain Rods Without Drilling?

While it is common to drill before hanging, there are a few different methods to hang curtain rods without drilling.

Here are the following methods below. 

#1. Tension Rods

Tension rods are an excellent option for those who don’t want to drill holes in their walls. 

These rods use mostly spring tension to stay firmly in place. Also, you can easily adjust them to fit the width of your window. 

Then, twist the rod to extend it to your desired length and place it between the two walls.

#2. Command Hooks

Command hooks are standard amongst people who want to hang curtains without drilling holes. 

These hooks use adhesive strips to attach to the wall. Surprisingly, they can hold a substantial amount of weight. 

To hang these hooks, you can attach the hooks to the wall where you want to hang the curtains. Then attach the rod to the hooks using S-hooks or other hardware.

#3. Magnetic Rods

Magnetic curtain rods are another option for those who don’t want to drill holes. As the name implies, these rods use magnets to attach to the wall, but they can only hold lightweight curtains, which is not a very suitable option. 

To hang this rod, position the magnets on either side of the wall, then attach the rod to the magnets.

Hanging your curtains without drilling can have both benefits and drawbacks. 

Below is a tabular illustration of them. 

Installing curtains without drilling is easy as anything.It isn’t suitable for hanging heavy curtains.
Hanging without drilling can be very flexible. The curtain may be unstable and print to fall.
It is cost-effectiveThe rods for hanging curtains on drywall are available in limited quantities. 

However, if you have concerns about the weight of your curtains or the safety of the rod, It’s best to consult a professional. 

Additionally, you can use the traditional drilling and anchors method to mount your curtain rod.


What Tools Do I Need to Hang a Curtain Rod on Drywall?

You will need a measuring tape, a level, a pencil, a drill, screws, drywall anchors, and the curtain rod set.

How Do I Determine Where to Place the Brackets on the Wall?

You can place curtain brackets about 4-6 inches above the window frame, but you can adjust this according to your preference. 

What is the Maximum Weight a Drywall Anchor Can Hold?

Generally, a standard plastic drywall anchor can hold up to 50 pounds, while a metal toggle bolt can hold up to 100 pounds.

Similar Posts