Your house’s plumbing and general workings are complex, from the source of the water to its delivery point.
It becomes troublesome when there is a break in the general flow at any point. More worrisome is dealing with water shooting out of your toilet.
It not only soils the bathroom floor; it also presents some health hazards. When water shoots out of your toilet, the only thought that comes to mind is how to fix it quickly.
When you find water shooting out of your toilet, it could mean that the water tank is overfilled, the flapper may be damaged or jammed, or a broken valve, a cracked water tank, or a broken seal. You should invite a plumber to provide a solution whenever you face this challenge.
This article will explain why water will shoot out of your toilet and provide some easy-to-do solutions.
In addition, it’ll highlight some common toilet problems and how you can fix them. You will have been well-versed in solving minor problems at the end of this article.
3 Reasons Why Toilet Water Shoots Out of The Bowl with Solutions
Here are some common reasons you will find water shooting out of your toilet.
- Overfilled Tanks
- Damaged Flapper
- Damaged Water Tank
#1. Overfilled Tanks
When the water tank overfills, it flows out of the casing and shoots into your bathroom.
The water tank of a typical flushing toilet is a ceramic pan that allows rapid filling of water and is connected to a drain pipe that allows the water to flush out the effluent.
The water tank receives water from the water line and acts as a reservoir whenever a flush is needed.
The rapid filling ensures adequate water is present in the tank when needed. Below the tank, the flapper opens into the bowl, where the waste is flushed.
When the tank overfills, water will shoot out of the toilet when you flush. A tank can get overfilled because of a blocked vent pipe, a blocked drain, or a higher filler float.
The spill usually comes from the tank when the filler float is too high. Water fills the tank rapidly and to the highest point with a high filler float.
When this kind of filling occurs, water will shoot out of the tank and drain to the floor of your toilet. A filling float is essential to prevent an overfilling tank.
Solution
when water shoots out of the toilet when you flush, and the problem is that the tank overfills, you should adjust the float.
Most households have the ball float. Another type of float is the cylindrical float. You can adjust the float to an optimal level when you identify the float.
The water level should be about 1-2 inches below the float. Any level higher than this may cause the tank to cover and allow water to shoot out of your toilet.
Once you have adjusted the float, look out for the drain and the vent pipe. If there is any blockage, relieve the clogs immediately.
#2. Damaged Flapper
Water might shoot out of the tank when the flapper is damaged. The toilet flapper is the part of the toilet between the tank and the bowl.
The flapper is made of rubber or plastic. It holds a seal to keep the water in the tank when you are not flushing.
This opening allows water to pass from the tank into the bowl. When opened, it acts as a valve that allows water into the bowl. When the valve shuts, water remains in the tank.
The water in the tank fills whenever the flapper is in its original position. Depending on the type of damage, water may shoot out of the tank to your bathroom.
Due to the constant movement of the flappers, the flapper can either bend, crack or break altogether.
Solution
Once you identify the problem, get your toilet repair kit. The toilet repair kit has the tools and light fittings you need to repair your toilet.
If the flapper is stuck, all you need to do is relieve it, and it will return to its original condition.
To reach the flapper, lift the lid on the toilet tank. Locate the flapper and test for its integrity with your hand. Trace the chain from the handle to the flapper hook.
Double-check by flushing with the handle. Once you have relieved the block, flush the toilet and watch the tank refill without leaking.
If the flapper is damaged, you may need to change the flapper. You can identify a damaged flapper by observing the disintegrated parts.
In this condition, you may need to invite your plumber. Changing a damaged flapper might be too complicated for you to complete yourself.
#3. Damaged Water Tank
The water tank acts like a reservoir. When you flush the toilet, the water refills itself as it awaits the next flush.
When the water tank is damaged, water will shoot out from the damage. Possible damages to the water tank include a crack or complete breakage.
Solution
when you have a crack, you can fix the crack yourself. You can apply some putty on the crack to seal up the crack.
Using putty or any other sealant depends on the crack size. When the crack is large, it is advisable to replace the entire tank.
At this point, you will need the services of a plumber. Replacing a tank can be a complex task requiring a plumber’s expertise.
Why Is Water Leaking from Toilet Tank to Bowl (Reason and Solution)?
Water might leak from the tank to the toilet bowl when the flapper is damaged. This leak is one of the commonest leaks in a household.
The toilet flapper is the part of the toilet between the tank and the bowl. This opening allows water to pass from the tan into the bowl.
When opened, it acts as a valve that allows water into the bowl. When the valve shuts, water remains in the tank.
The flapper is made of rubber or plastic. This flapper holds a seal to keep the water in the tank when you are not flushing.
The water in the tank fills whenever the flapper is in its original position. Depending on the type of damage, the amount of water that leaks from the tank to the bowl may change.
Due to the constant movement of the flappers, the flapper can either bend, crack or break altogether.
The leak from the tank to the bowl in a destroyed flapper is usually silent. This leak can go unnoticeable for a long time.
The first sign you may notice is a silent tickling sound that persists after every flush—depending on the amount of leak every time.
Solution
Once you identify the problem, get your toilet repair kit. The toilet repair kit has the tools and light fittings you need to repair your toilet.
If the flapper is stuck, all you need to do is relieve it, and it will return to its original condition.
To reach the flapper, lift the lid on the toilet tank. Locate the flapper and test for its integrity with your hand. Trace the chain from the handle to the flapper hook.
Double-check by flushing with the handle. Once you have relieved the block, flush the toilet and watch the tank refill without leaking.
If the flapper is damaged, you may need to change the flapper. You can identify a damaged flapper by observing the disintegrated parts.
In this condition, you may need to invite your plumber. Changing a damaged flapper might be too complicated for you to complete yourself.
3 Common Toilet Problems and Fixes
Here is a brief rundown on some of the commonest problems you can find with your toilet and how to fix them.
- leaky toilet
- unable to flush,
- slow filling of the tank
#1. Leaking Toilet
the water in the tank can constantly leak into the bowl. Sometimes, water can continue to leak out of the tank into the floor.
You should check the flapper or the float ball when this leak happens. Once you fix the flapper, water will stop leaking into the bowl.
When water leaks from the tank, adjust the float ball to about 1-2 inches above the water level. When you make this adjustment, the water will stop leaking out of the tank.
#2. Unable To Flush
There is a partial or complete clog when your toilet fails to flush. When you experience clogs, there may have been some blockage.
There are chances that some materials have been forced down the drain by kids who may have inserted some toys.
In some other instances, other non-bio gradable substances may have been flushed down the toilet. Such substances include paper towels, sanitary pads, and wipes.
Any hard substance that cannot be dissolved by water will clog the toilet. This should be disposed of as trash.
With the aid of your plunger, you can unclog the drain. You can find a plunger in the toilet repair kit. You can flush your toilet freely once you unclog the drain with a plunger.
#3. Slow Filling of The Tank
The toilet tank is supposed to fill up rapidly. When it fills up slowly, then there is a problem. The problem may be from the tank, the tubes, or the bowl.
When the damage is at the tank, the tank may have been cracked. The water will find other avenues to leak out, not allowing the tank to fill up on time.
When the crack widens, more water will leak out and cause the tank to fill slowly or not.
Sometimes, the filling tube will be damaged. When this happens, the tanks will fill slowly. The filling tube is responsible for bringing water into the tank.
When the filling tube is damaged, water from the water source may leak into the ground. In another instance, when the flapper is damaged, water will leak into the bowl continually.
This continuous leakage will prevent the tank from filling up rapidly.
If the problem is due to a broken tank, you may need to replace the tank. If the problem is from a faulty flapper, fix the flapper.
When the problem is from a damaged tube, you might invite your plumber to replace the damaged tube.
